Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
oWner's mAnUAl
Operating and Servicing Instructions
IMPORTANT
!
!
READ CAREFULLY BEFORE
ASSEMBLY AND USE.
Questions or concerns?
For assistance, please call Customer
Service at 1300 360 845
Mon-Fri 8.30am-5pm EST.
PleASe do noT reTUrn THIS
ProdUCT To THe STore.
THIS PRODUCT
IS INTENDED FOR
HOUSEHOLD USE ONLY.
IF USED COMMERCIALLY
WARRANTY IS VOID.
hooverfloorcare.com.au
©2011 Techtronic Industries Pty ltd
*On hard floors, when used with Hoover
®
All rights reserved. #961145002
Multi-purpose Disinfectant in accordance
Id102309-r0
with owner's manual
Advertisement
Table of Contents
Related Manuals for Hoover Enhanced Clean
Summary of Contents for Hoover Enhanced Clean
- Page 1 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF USED COMMERCIALLY WARRANTY IS VOID. hooverfloorcare.com.au ©2011 Techtronic Industries Pty ltd *On hard floors, when used with Hoover ® All rights reserved. #961145002 Multi-purpose Disinfectant in accordance Id102309-r0 with owner’s manual...
-
Page 3: Table Of Contents
Thank you for choosing a HOOVER product. ® Please enter the complete model and Manufacturing Code in the spaces provided. Model MFG. Code Tip: Attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for Manufacturing code warranty service of your HOOVER product. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: • Fully assemble before operating. •... - Page 5 • Do not clean over floor electrical outlets. • Do not use the Steam Mop on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam sensitive materials. • Use only with Hoover® Multi-Purpose Disinfectant or Hoover All-Purpose Cleaner. ®...
-
Page 6: Product Assembly
Product Assembly CArton Contents A. Handle B. S team Mop Body (Clean Water Tank and Solution Tank attached) C. Multi-Surface Microfiber Pad (x2) D. Hard Floor Microfiber Pad E. Carpet Glider F. H ard Water Filter (Pre-assembled in steamer, remove front tank to expose filter) G. Cooling Base ■ R emove all parts from carton and identify each item shown. ■ M ake sure all parts are located before disposing of packing materials. Cord storAge AttACh hAndle ■ Insert handle into ■... -
Page 7: How To Use
how to Use steAmer desCriPtion 1. Handle 2. U pper Cord Hook (Rotating Quick Release Cord Hook) 3. Lower Cord Hook (Fixed Cord Hook) 4. Power Cord 5. Clean Water Tank 6. Power Button 7. Floor Head 8. Steam Release Trigger 9. Solution Tank 10. Clean Control Dial 11. P ower Indicator Light Blue Light = Unit On 12. S team Ready Indicator Light Green Light = Steamer Ready No Light = Steam NOT Ready Accessories 13. Multi-Surface Microfiber Pad (2) 14. Hard Floor Microfiber Pad 15. Carpet Glider 16. H ard Water Filter (Preassembled in steamer, remove front tank to expose filter) -
Page 8: Before You Begin Cleaning
how to Use (continued) Before yoU Begin CleAning filling CleAn WAter tAnK WARNING To reduce the risk of personal injury, unplug the steamer when assembling the steamer. Do not use hot or boiling water to fill clean water tank. ■ Remove the clean water tank (2.2) on the FRONT of the Steam Mop. ■ Twist the cap counter clockwise to remove (2.3). ■ Fill the water tank with 500ml of water. Replace the water cap and twist clockwise until tightly secure. ■ Ensure hard water filter is in place (see page 13). ■ Slide the clean water tank down and snap into place (2.5). AttAChing the miCrofiBer PAds WARNING To reduce the risk of personal injury, unplug the steamer when assembling the accessories. • IMPORTANT • Never use the Steam Mop without the Microfiber pad correctly attached to the floor head. -
Page 9: Filling Solution Tank
Use (continued) filling solUtion tAnK WARNING To reduce the risk of personal injury, unplug the steamer when filling the steamer. ■ Remove the solution tank from the BACK of the steam cleaner (2.8) ■ Twist the cap counter-clockwise to remove (2.9) ■ DO NOT MIX HOOVER MULTI-PURPOSE ® DISINFECTANT OR HOOVER ® MULTIPURPOSE CLEANER WITH ANY OTHER CLEANING 2.10 2.11 SOLUTION ■ Fill the tank with 300ml of recommended Hoover Multi-Purpose Disinfectant or Hoover ® ® Multi-Purpose Cleaner. Replace cap and twist clockwise (2.10) until tightly secure. ■ Slide the solution tank down and snap into place (2.11). ■ You can now disinfect or clean on demand by turning the Clean Control dial (2.12) to the... -
Page 10: Steam Cleaning Hard Floors
how to Use (continued) steAm CleAning hArd floors WARNING 2.13 2.14 Never leave the Steam Mop in one spot on any surface for an extended period of time with a damp or wet Microfiber pad attached as this may damage the floor surface. Your Steam Mop should only be used on tiles, linoleum or sealed wood flooring. If used on wax flooring, you may experience loss of glossiness. This steam mop may not be suitable for all floating floorboards – please check with your 2.15 2.16 floorboard manufacturer prior to use. To reduce the risk of personal injury, unplug the steamer when assembling the accessories. Do not clean over floor electrical outlets. Do not operate Steam Mop without water in clean water tank. Do not use unit or press the trigger with no water in the tank. • IMPORTANT • Never use the Steam Mop without the Microfiber pad properly attached to the floor head. ■ Attach Microfiber pad. Plug in and press the power button on the steamer (2.13). ■ The unit will take roughly 30 seconds to be ready to produce steam. Once steam is ready to be produced, the green “steam ready” indicator will illuminate. -
Page 11: Using On Carpet
how to Use (continued) Using on CArPet WARNING 2.18 2.17 Do not clean over floor electrical outlets. Do not use unit or press the trigger with no water in the tank. Do not fill the solution tank when using on carpet surfaces. • IMPORTANT • 2.19 2.20 When using on carpets, always ensure the Microfiber pad is properly attached to the floor head. ■ Attach Multi-Surface Microfiber Pad. Plug in and press the power button on the steamer. ■ The unit will take roughly 30 seconds to be ready to produce steam. Once steam is ready to be produced, the green “steam ready” indicator will illuminate. ■ Place the steamer into the carpet glider (2.17). ■ To recline the steamer place foot on floor head and tilt handle (2.18). ■ To produce steam squeeze the trigger (2.19). ■ Move the Steam Mop slowly backwards and forwards across the floor (2.20) paying particular attention to high traffic areas. -
Page 12: Maintenance
maintenance Familiarize yourself with these home maintenance tasks as proper use and care of your Steam Mop will ensure continued cleaning effectiveness. All servicing should be done by an authorized service representative. CleAn WAter tAnK • IMPORTANT • Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. How to Empty ■ Remove the clean water tank located on the front side of Steam Mop (3.1). ■ Twist the cap counter-clockwise to remove (3.2). ■ Empty any excess water into the sink, allow to air dry and replace water cap and return to the Steam Mop (3.3). miCrofiBer PAd How to Clean • IMPORTANT • • IMPORTANT • Allow the Steam Mop to fully cool down before performing any maintenance or Never use bleach or fabric softener when troubleshooting checks. washing the pad. -
Page 13: Hard Water Filter
(continued) hArd WAter filter • IMPORTANT • The condition of the filter affects the performance of your machine. Check and change filter (depending on level of use). Do not operate Steam Mop without hard water filter in place. When to Replace ■ To locate hard water filter, remove clean water tank on FRONT of Steam Mop. ■ Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will discolour/ darken over time. Depending on water hardness and/or frequency of use the filter should be changed every 12 months (3.5). Contact a HOOVER customer service representative at 1300 360 845 for ® replacement details: Part #440001633. storage ■ Unplug the power cord and disconnect the power supply. ■ Place steamer in cooling base and allow to cool. ■ Empty the residual water in the tank and clean the external surface with a dry cloth. Allow to dry. ■ Re-install water tank, replace in cooling base to prevent damage to floor and store in upright position. ■ Leaving unused solution in solution tank will not affect performance. -
Page 14: Troubleshooting
troubleshooting USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING. All servicing should be done by an authorized service representative. WARNING To reduce risk of personal injury - unplug Steam Mop before servicing and allow to cool. ProBleM PoSSIBle CAUSe PoSSIBle SolUTIon Steam Mop won’t run 1. Unit may not be plugged into the 1. Ensure the plug is pushed in electrical outlet correctly. securely. 2. The electrical outlet may not be 2. Check fuse or breaker in home. working properly, check the fuse or Replace fuse/reset breaker in home. breaker, or consult an electrician. 3. The power cord may be damaged. 3. If cord is damaged have it replaced by an authorized service representative. Steam mop not 1. Clean water tank may be empty. 1. Please refer to the “Filling Clean producing steam Water Tank” section. -
Page 15: Clearing Blockages
■ Turn the steamer off, and unplug. ■ Let it cool completely. ■ Remove the microfiber pad and inspect the steam port on the bottom of the nozzle for blockages. If a blockage can be seen, use a small thin object such as a paperclip to try to free the blockage (5.2). ■ If the steam path is still blocked, then remove the screw on the back of the tube (5.3, A) that runs down to the nozzle. ■ Once the screw is removed, the nozzle can be removed by pulling straight downward away from the main body of the steamer. ■ After the nozzle is removed, examine the small hole on the end of the tube extending from the steamer. Using a thin object such as a paperclip, attempt to remove the blockage (5.3, B). ■ If the steam path is still blocked, take the product to an authorized Hoover Service representative. Call 1300 360 845. service To obtain approved Hoover service and genuine Hoover® parts, locate the nearest Authorized Hoover ® ® Warranty Service Dealer (Depot) by: • Checking the Yellow Pages under “Vacuum Cleaners” or “Household”. • V isit our website at hooverfloorcare.com.au Follow the service center link to find the service outlet nearest you. • For an automated referral of authorized service outlet locations call 1300 360 845. If you need further assistance: To speak with a customer service representative call 1300 360 845; Mon-Fri 8.30am-5pm EST. Always identify your Steam Mop by the complete model number when requesting information or ordering parts. - Page 16 ©2011 Techtronic Industries Pty ltd All rights reserved. #961145002 Id102309-r0...