Advertisement
Available languages
Available languages
Quick Installation Guide
Choose one of the solutions below to solve your problem according to the scan result.
Result 1:
Nothing Detected
Power off AVerMedia HomeFree AVplus. Check again if all devices are well and firmly
connected. Then, turn power back on AVerMedia HomeFree AVplus. Wait until the LED
indicator turns from blinking to steady on (Please wait for around 20 seconds.), and repeat
Scan.
If the blue LED indicator keeps blinking for more than one minute, refer to Q1 & A1.
Result 2:
AVerMedia HomeFree AVplus detected
ENG-20
Advertisement
