Advertisement
Available languages
Available languages
Quick Installation Guide
2.2 Installing the Power Adaptor and connecting to power source
Slide the Power Adaptor Outlet Module into the groove on the Power Adaptor. Connect the
Power Adaptor connector to the DC-IN port on the rear of AVerMedia HomeFree AVplus.
Plug the Power Adaptor to a wall outlet.
2.3 Turning on AVerMedia HomeFree AVplus
Check if the Blue LED indicator on the front of AVerMedia HomeFree AVplus is stably on.
!
*When the unit is powered on, all the LED indicators (1 blue & 2 green) go on and then off
first. The blue LED indicator then lights up again and starts to blink. AVerMedia HomeFree
AVplus is ready when the blue indicator goes from blinking to steady.
!
If the blue LED indicator keeps blinking, please check if cables among the AVerMedia
HomeFree AVplus devices are connected correctly.
ENG-5
Advertisement
