Avermedia HomeFree AVplus F210 Quick Manual page 17

Quick Installation Guide
5 The IR Learning Wizard
5.1 Activating the IR Learning Wizard
If your AVerMedia HomeFree AVplus is connected to a Set-Top box, you can use the built-in
IR Learning device of AVerMedia HomeFree AVplus and the remote control of your Set-Top
box to have AVerMedia HomeFree AVplus memorize the command signals of your Set-Top
box. Once you have the IR Learning completed, you can use the AVer MediaCenter
HomeFree provided to control over your Set-Top Box.
Before IR Learning, please connect the IR blaster to the IR blaster port on the AVerMedia
HomeFree AVplus and place the IR blaster within the recommended distance of 10 cm near
the IR sensor on the desired device.
!
Please turn off ditigal TV tuner during IR Learning process.
After completing hardware installation, please follow the steps below to complete the IR
Learning process.
ENG-12