Cooktop Installation; Checking Operation; Before You Call For Service - Kenmore induction COOKTOP Installation Instructions Manual

KENMORE iNductiON cOOKtOP iNStALLAtiON iNStRuctiONS

cooktop installation

1. Visually inspect the cooktop for damage. Also make
sure all cooktop screws are tight (see Figure 5).
Figure 5
2. Install the retainer brackets. See Figure 6.
the retainer brackets MuSt be installed, to meet
local codes or, in their absence, with the National
Electrical code ANSi/NFPA No. 70—latest edition
in the united States, or with cSA Standard c22.1,
canadian Electrical code, Part 1 in canada (see
Figure 6).
Countertop
Cooktop
Nylon spacer
Retainer bracket
Figure 6
3. Set the cooktop into the countertop cutout.
NOtE: Do not use caulking compound; cooktop should
be removable for service when needed.
Screws
WARNING
do not remove the nylon spacers on
the edges of the cooktop. these spacers center the
cooktop in the space provided. the cooktop must
be centered to prevent excess heat buildup that
may result in heat damage or fire (see Figure 7).
Nylon spacer (6)
Hole located under
the burner box to fix
the retainer bracket.
Position brackets on
unit cutout center
line as shown.
4. Fix the cooktop to the bracket using the screws
supplied (see Figure 7).
Granite countertop installation
Granite countertop installation kit p/n 903061-9010
can be ordered through a Service center, by phone
at 1-800-4-MY-HOME

checking Operation

Refer to the use and care Guide for operation.
CAUTION
Do not touch cooktop glass or elements.
They may be hot enough to burn you.

Before You call for Service

Read the Before You Call for Service Checklist and
operating instructions in your use and care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your use and care Guide for Sears service
phone numbers, or call 1-800-4-MY-HOME
5
Retainer bracket (2)
Figure 7
.
®
.
®