Cooktop Installation; Granite Countertop Installation; Checking Operation; Before You Call For Service - Kenmore induction COOKTOP Installation Instructions Manual

KENMORE iNductiON cOOKtOP iNStALLAtiON iNStRuctiONS

cooktop installation

1. Visually inspect the cooktop for damage. Also make
sure all cooktop screws are tight (see Figure 5).
Figure 5
2. Install the retainer brackets. See Figure 6.
The retainer brackets MUST be installed, to meet local
codes or, in their absence, with the National Electrical
Code ANSI/NFPA No. 70—latest edition (see Figure
6).
Countertop
Cooktop
Spring
Spacer
Retainer bracket
Figure 6
3. Set the cooktop into the countertop cutout.
NOtE: Do not use caulking compound; cooktop should
be removable for service when needed.
Screws
Hole located
under the
Spring
burner box
spacer (8)
to fix the
retainer
bracket.
Position brackets
on unit cutout
center line as
shown.
4. Fix the cooktop to the bracket using the screws
supplied (see Figure 7).

Granite countertop Installation

Granite Countertop Installation kit Div 22, Src 628, p/n
903061-9010 can be ordered through a Service Center,
by phone at 1-800-4-MY-HOME
at www.partsdirect.com.

Checking Operation

Refer to the use and care guide for operation.
CAUTION
Do not touch cooktop glass or
elements. they may be hot enough to burn you.

Before You Call for Service

Read the Before You Call for Service Checklist and
operating instructions in your use and care guide.
It may save you time and expense. the list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your use and care guide for Sears service
phone numbers, or call 1-800-4-MY-HOME
6
Retainer bracket (2)
Figure 7
® or through our web site
.
®