Outbound On Gps Approach Using Hsi - Honeywell KAP 140 Manual

Two Axis Operation

Outbound on GPS Approach Using HSI

* Description of GPS operation based on Bendix/King GPS receiver. Others may
require different operation.
D.C. ELEC.
TURN COORDINATOR
L R
2 MIN.
NO PITCH
INFORMATION
GS GS
ı
G
KAP 140
UP
DN
AP HDG NAV APR REV ALT
APR
1. The aircraft is in mode approaching the
IAF. Approach arm is indicated on the GPS
annunciator.*
76
KAP 140 AUTOPILOT SYSTEM
D.C. ELEC.
TURN COORDINATOR
L R
2 MIN.
NO PITCH
INFORMATION
GS GS
ı
G
KAP 140
UP
DN
AP HDG NAV APR REV ALT
2. Upon waypoint alerting at the IAF, the course
pointer is set to 238°, the GPS's Leg/OBS mode
switching is set to OBS mode. The autopilot ini-
tiates a left turn to track the 238° GPS course.
Rev. 1
Apr/02
D.C. ELEC.
TURN COORDINATOR
L R
2 MIN.
NO PITCH
INFORMATION
GS GS
ı
G
KAP 140
UP
DN
AP HDG NAV APR REV ALT
3. At the desired point, heading mode is used to
initiate the procedure turn. During the procedure
turn outbound, the deviation bar shows that the
aircraft is flying away from the GPS course at a
45° angle on a selected heading of 283°.
Rev. 1
KAP 140 AUTOPILOT SYSTEM
Apr/02
Two Axis Operation
D.C. ELEC.
TURN COORDINATOR
L R
2 MIN.
NO PITCH
INFORMATION
GS GS
ı
G
KAP 140
UP
DN
AP HDG NAV APR REV ALT
4. The heading bug has been set to 103° and the
aircraft has made a left turn to this heading.
The GPS's Leg/OBS mode switching is set to
Leg mode and the course pointer is set to
058°. Select approach mode by depressing the
APR
button.
77