Back Course (Rev) Mode Using An Hsi - Honeywell KAP 140 Manual

Single Axis Operation
G
KAP 140
AP
D.C. ELEC.
TURN COORDINATOR
L
2 MIN.
NO PITCH
INFORMATION
GS
ı
30
HDG NAV APR
R
GS
KAP 140 AUTOPILOT SYSTEM
REV
Back Course (REV) Mode Using
an HSI
The Back Course (REV) mode
allows the autopilot to intercept and
track a localizer back course.
To arm REV mode (with the
KAP 140 currently in the HDG
mode):
1. Select the desired frequency for
LOC.
2. Course Bearing Pointer - SET
to the FRONT COURSE inbound
heading.
3. Heading Selector Knob - SET
BUG to provide desired intercept
angle.
4. REV Mode Selector Button -
PRESS. Note REV ARM annunci-
ated.
Rev. 1
Apr/02