Honeywell KAP 140 Manual page 39

5. If the Course Deviation Bar is
greater than 2 to 3 dots: the air-
craft will continue in HDG mode
(or ROL if HDG is not selected)
with the REV ARM annunciated;
when the computed capture point
is reached HDG mode will disen-
gage, the ARM annunciator will go
out and the selected course will be
automatically captured and
tracked. If the D-Bar is less than 2
to 3 dots: the HDG mode (or ROL
if HDG is not selected) will disen-
gage upon selecting REV mode;
the REV annunciator will illumi-
nate and the capture/track
sequence will automatically begin.
Note: Intercept angles greater than
45° can result in course overshoot
when close
Therefore, intercept angles greater
than 45° are not recommended.
Rev. 1
Apr/02
to the station.
KAP 140 AUTOPILOT SYSTEM
Single Axis Operation
31