Controls And Indicators - Jensen VM9412 Installation And Operation Manual

VM9412

CONTROLS AND INDICATORS

Button Operation
1. OPEN/CLOSE
Press to activate the automatic mechanical system and
move the TFT monitor into viewing position. Press again to
close the TFT.
2. DISP
Press to cycle through information available on the LCD
screen.
3. AS
Press to automatically store the first six strong stations in
preset memory. Applies to current band only.
4. BAND
Press the BAND button to change the AM, FM or SAT
band.
5. AUDIO
Rotate to adjust the volume. Press to enter and/or confirm
audio settings.
6. SRC
Press to select playing mode.
7. LCD Display
8. MUTE
Press to silence the receiver. Press again to resume previous
volume level.
NOTE: The VM9412 features Softmute, which will allow
the volume to increase or decrease gradually when the
MUTE function is activated or deactivated.
9. IR Remote Control Receiver
10. (left joystick)
DVD/Disc Mode: Press once to play back the previous
chapter/track.
TUNER Mode: Press once to auto-search for the previous
available radio station.
MENU Mode: Press once to move the cursor to the left.
11. (down joystick)
DVD/Disc Mode: Press once for slow forward/slow reverse.
TUNER Mode: Press to go down one frequency step.
MENU Mode: Press once to move the cursor down.
12. Reset
Press to reset system settings to factory default (except the
password and parental lock setting).
4 3
BAND AS
Pres s Audio
VM9412
5
SRC
9
6
7
7
PTY
REAR RPT SCN RDM STOP
18 19 20 21 22
2 1
OPEN
DISP
16
Enter
15
MUTE 14
13
8 10 11 12