Scanner Operation; Audible - Honeywell 7120 Orbit User Manual

Presentation laser scanner
Hide thumbs Also See for 7120 Orbit:
Table of Contents

Advertisement

S
O
CANNER
PERATION
Audible Indicators
When the 7120 is in operation, it provides audible feedback to indicate the status
of the scanner. Eight settings are available for the tone of the beep (normal, six
alternate tones and no tone). For instructions on how to change the tone of the
beeper, refer to the MetroSelect Configuration Guide (00-02407).
One Beep
When the scanner first receives power the blue and white LED will toggle on
and off. The scanner will beep once, then the LEDs will stop toggling and the
blue LED will remain on to indicate the scanner is ready to scan.
When the scanner successfully reads a bar code, the white LED will flash and
the scanner will emit a beep*. If the scanner does not beep once and the white
light does not flash, then the bar code has not been successfully read.
Razzberry Tone
This is a failure indicator. Refer to Failure Mode Indicators on page 14.
When in configuration mode, a razzberry tone indicates that an invalid bar code
has been scanned.
Three Beeps - During Operation
When entering configuration mode
white and blue LED will start to toggle on and off. The blue LED and the white
LED will toggle on and off until the scanner exits the configuration mode.
Upon exiting configuration mode
scanner will beep three times. The blue LED will then stay on indicating the
scanner is ready to scan.
When using one-code-configuring, the scanner will emit a unique beep three
times after scanning. This indicates that the single configuration bar code has
successfully configured the scanner.
Three beeps* can also indicate a communications timeout during normal
scanning mode.
Three Beeps - On Power Up
This is a failure indicator. Refer to Failure Mode Indicators on page 14.
* This feature is configuration dependent. Refer to the MetroSelect Configuration Guide
to enable this feature.
Refer to the Multi-Code Configuration Method in the MetroSelect Configuration Guide.
12
the scanner will beep three times and the
, the white LED will flash three times and the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orbit 7120Orbit ms7120-38Orbit ms7120-41Orbit ms7120-47Orbit ms7120-106

Table of Contents