THOMSON SpeedTouch 585 Installation And Setup Manual page 20

Chapter 2
Basic Installation
Configuring the
SpeedTouch™ (and
your computer)
14
Proceed as follows:
1
Depending on the selected service profile and your ISP's requirements, you
may have to fill in some additional settings during the Home Install Wizard,
like Dynamic DNS Service, Time Configuration or other.
Enter the information provided by your ISP and click Next whenever
requested.
2
To protect the wireless connections to your SpeedTouch™, move the slide
control to the desired security mode.
The following security modes to secure traffic between the SpeedTouch™ and
connected wireless stations are available:
Low, which implies in fact that no security measures are taken at all.
Medium, implying that traffic is encrypted by means of a static
encryption key (WEP).
High, providing the highest security standard available (WPA) for
encrypting all wireless traffic.
For an overview of all SpeedTouch™ wireless security features, see
" Securing your wireless network" on page 23.
E-DOC-CTC-20051017-0093 v1.0