Specifications - Hitachi C 18DL Technical Data And Service Manual

5. SPECIFICATIONS

Model
Saw blade diameter
Cutting depth
Type of motor
Type of handle
Type of switch
Housing, handle cover
Saw cover
Enclosure
Lower guard
Charger
Battery
Rotation speed
Current (A)
Battery
Sealed cylindrical lithium-ion storage battery
(Type EBM 1830)
Nominal voltage
Nominal life
Nominal capacity
Overcharge protection system:
Charger
(1) Battery voltage detection ( -- V system) for Ni-Cd battery
(Model UC 18YRL)
(2) Battery surface temperature detection (thermistor)
(3) 120-minute timer
(4) Stop current detection (Li-ion batteries)
Power input: 95 W
Charging time: Approx. 45 minutes [for type EBM 1830 battery at 20ûC (68ûF)]
Operable ambient temperature range: 0 ûC --- 50ûC (32ûF --- 122ûF)
Indication method of battery charging function:
NOTE: During standby for cooling battery, the Model UC 18YRL cools the overheated battery by
Weight
Net
Gross
Standard accessories
at 90û
at 45û
No-load
• • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • •
Battery temperature detection (dT/dt system) for Ni-MH and SUPER Ni-MH batteries
Before
Blinks
charging
While
Lights
charging
Charge status
lamp (Red)
Charging
Blinks
completed
Charging
Flickers
impossible
Overheat
Overheat lamp
Lights
standby
(Green)
cooling fan.
C 18DL
165 mm (6-1/2")
0 --- 57 mm (0 --- 2-1/4")
0 --- 40 mm (0 --- 1-9/16")
DC magnet motor
D type
Trigger switch (automatic return type with switch-lock)
Glassfiber reinforced polycarbonate resin
Magnesium
Polycarbonate
ABS resin
Glassfiber reinforced polyamide resin
3,400/min.
4.5 A
DC 18 V
Charging/discharging: Approx. 1,500 times
3.0 Ah
Indication of the pilot lamp
0.5 sec. ON 0.5 sec. OFF
Stays ON continuously
0.5 sec. ON 0.5 sec. OFF
0.1 sec. ON 0.1 sec. OFF
Stays ON continuously
Main body (including battery) ............... 3.2 kg (7.1 lbs.)
Charger unit (including cord) ................ 0.6 kg (1.3 lbs.)
Main body, charger, case and other
standard accessories ............................ 8.0 kg (17.8 lbs.)
Charger (UC 18YRL) .................................................. 1
Saw blade ................................................................... 1
Box wrench ................................................................. 1
Guide .......................................................................... 1
Plastic tool case .......................................................... 1
--- 4 ---
Malfunction in the battery
or the charger.
Battery overheated.
Unable to charge.
(Charging will commence
when the battery is cooled.)