System Reset; Line Mute - Jensen VM9411 Instruction Manual

VM9411
the DVD output using the rear zone remote control. See
"Multi-Zone Remote Control" on page 12 for instructions.

System Reset

To correct a system halt or other illegal operation, use the tip
[RESET] Button
of a pen to press the RESET button (22) located on the front
bottom-right corner of the unit. After a system reset, the unit
restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.

Line Mute

If the "MUTE" wire is connected, audio output mutes when a
telephone call is received by the car phone or when verbal
navigation is performed (external navigation input required).
16