System Reset; Parking Brake Inhibit - Jensen VM9125 Operating Instructions Manual

System Reset

To correct a system halt or other illegal operation,
use the tip of a pen to press the reset button
located on the front bottom-right corner of the unit.
After a system reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the
reset is complete.
Image/Display Settings
Video Output Modes
Table 2 shows the video output mode for each playing source.
Playing Source
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal

Parking Brake Inhibit

• When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
12
Table 2: Video Output Modes
Video Output Modes
RGB Mode
RGB Mode
CVBS Mode
VM9125
[RESET] Button