Precautions - Hall Research Technologies HR-733 User Manual

Model HR-733
 3 video inputs (2 HDMI and 1 VGA/YPbPr with Audio)
 Transmits uncompressed HDMI video along with RS-232 to 1000m
 Supports Deep-color (HDMI 1.3 or 1.4) and 3D
 Compatible with DVI video (with DVI to HDMI input cable)
 Converts PC VGA or component video and audio to HDMI at any
resolution
 Automatically detects VGA/YPbPr input and timing parameters
 Front panel LCD readout for easy setup and control
 Status indication of fiber-optic link, remote LCD (hot-plug), and
Source video
 Bi-directional RS-232 data transmission between the sender and the
receiver
 RS-232 control of the input source selection and setup
 1RU high Sender includes rack-mount brackets, and Receiver has
surface mounting provisions
 Safety interlock does not turn on high-power fiber LED drivers
unless fiber-optic cable is plugged in at both ends
 Front panel button functions can be locked through serial port
 Locking HDMI connectors
 Green design, turns off parts of circuit when they are not in use
 Compact, Rugged, Reliable, and Economical
 Made in USA

3.0 Precautions

This device is a Class 3R Laser device
(per IEC 60825-1:2007) and can cause
damage to eye sight if used improperly.
Refer to ANSI Z136 for proper handling
and usage of Class 3R devices.
This device is sensitive to Electrostatic
Discharge (ESD). Prior to touching the
unit (especially the connectors), touch a
grounded object, and make sure the
devices that will be plugged in to the
HR-733 are properly grounded.
4