Main Unit - Yaesu FRG-100 Technical Supplement

Main Unit

bles.
remove the 8 screws affixing the top cover
(Figure 1).
Figure 1.
Carefully remove the top cover, paying spe-
speaker to the main unit. The plug tan be
removed from the socket on the main board
if desired (remember to reconnect before at-
component side of the Main Unit.
affixing the unit and the screws affixing the
antenna terminal and EXT DC connector on
the rear Panel (Figure 2).
Figure 2.
Case Disassembly & Circuit Board Access
0
To access the local unit, remove the 8 screws
affixing the bottom cover (Figure 3).
Figure 3.
To remove the local unit, remove the 7 screws
affixing the unit, and the 2 screws used on the
CAT connector on the rear Panel. This ex-
poses the component side of the Local Unit
(Figure 4).
Figure 4.
2-l