Oil the chain (after removing the side cover R), the four
columns and the screws for elevating the main frame.
This periodic lubrication should be performed with
Oiling and all maintenance should be done with the
tool turned off and unplugged.
Always brush off dirt, chips and foreign matter adhering
to the roller surfaces, motor vents and drums.
Limit for re-sharpening of standard blade
Do not use the standard blade whose blade length is
under 4 mm.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
3. More than 4 mm
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Socket wrench 9
Hex wrench 2.5
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.