Emergency Retraction Procedure - Thor Motor Coach Class C Owner's Manual

Hide thumbs Also See for Class C:

Table of Contents

Emergency retraction Procedure

CAUTION

FoLLoWING MaNUaL oVErrIDE oPEraTIoN, FaILUrE To rETUrN aLL

VaLVES To NorMaL PoSITIoN MaY rESULT IN oNE or MorE JaCK

LEGS DrIFTING DoWN FroM ThEIr rETraCTED (SToWED) PoSITIoN.

For CarTrIDGE VaLVES, roTaTE ThE CENTEr SCrEW FULLY CoUNTEr-

CLoCKWISE.

In the event of electrical failure, the jack leg(s) may be retracted manually by following the procedure below.

The individual cartridge valves are clustered together on the side of the pump manifold.

Locate the screws on the appropriate cartridge valve(s).

Using a 5/32" Allen wrench, turn the screw(s) clockwise until all the way in.

Note:

The normal operating position of the screw in the cartridge valve is the

counter-clockwise 'out' position. The only time the valve should be shifted manually

is when attempting to operate jack(s) via manual override.

Remove the plastic cap from the top of the motor and disconnect the power cables.

Attach a 1/2" socket to the motor's coupler and drive it with a drill, ratchet or similar device.

To retract your jack(s) run the drill in the counter-clockwise direction.

To extend your jack(s), run the drill in the clockwise direction.

When manual override is complete, return the cartridge valve(s) to the normal positions.

Reinstall power cables and plastic cap on motor.

Thor MoTor CoaCh

CoNTroLS aND oPEraTIoNS

Table of Contents

Hurricane Windsport Serrano