Programming Scan Channels; Priority Channel; Choosing A Priority Channel; Drop-Out Delay - Uniden UH076SX-NB Owner's Manual

Operation

Programming Scan Channels

1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
NOTE
2. Select the channel you want to store by pressing
3. Press and hold
two short tone beeps are heard.
4. To remove the channels from Memory, press and hold
secs. once more. Two short tone beeps are heard and the MEM icon
disappears.

Priority Channel

The Priority Channel feature allows the user to monitor one channel in
the UH076SX-NB, monitoring it every 1.5 secs. during Group Scanning.

Choosing a Priority Channel

The starting channel, when Group Scanning is
initiated, is always the Priority Channel. To change
the priority channel setting while scanning,
(eg. PRI Channel is CH17 (476.825 MHz ));
a. press , to select a higher channel
(scanning pauses).
or
b. press , to select a lower channel
(scanning pauses).

Drop-out Delay

While scanning, the UH076SX-NB stops at a busy channel and receives
a signal. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
UNIDEN UH076SX-NB
mem
for 1.5 secs. to store. MEM icon appears and
21
Handheld UHF-CB Transceiver
or .
mem
for 1.5