Group Scan (Gs) Mode - Uniden UH076SX-NB Owner's Manual

Operation
If SCAN is deactivated while in an active channel, the
UH076SX-NB will stay on that active channel. If no other
channels are active, the UH076SX-NB will reinstate the
NOTE
starting channel.

Group Scan (GS) Mode

Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press the
the display.
GS Scanning checks the Priority channel activity regularly.
If GS Scanning is initiated when there are no channels
programmed in GS memory, an error tone will be heard and
scanning will not start.
NOTE
If the Priority channel becomes active the radio will stay on that channel
for as long as the signal is present. If the received signal ceases, Priority
scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority
Channel the UH076SX-NB will continue monitoring the
Priority Channel for activity while listening to the active one.
NOTE
To deactivate SCAN, press
If SCAN is deactivated while it is turned to an active
channel, the UH076SX-NB will stay on that active channel.
If none of the channels are active, the UH076SX-NB will
NOTE
reinstate the Priority channel.
UNIDEN UH076SX-NB
os/gs
scan
or PTT .
20
key. GS icon appears on
Handheld UHF-CB Transceiver