Connecting The Spkr/Mic; Mount The Hang-Up Bracket; Conventional Mounting With Screws - Uniden UH076SX-NB Owner's Manual

Getting Started

Connecting the SPKR/MIC

Release the SPKR/MIC jack cap to plug in the SPKR/MIC. Secure the
SPKR/MIC plug by tightening the plug collar clockwise.
Mount the Hang-Up Bracket (UH076SX-2NB-TP)
Use the radio Hang-up Bracket when charging the UH076SX-2NB-TP
with the Cigarette Lead Charger in a vehicle. The radio Hang-up Bracket
comes in two parts. How and where you choose to mount the Hang-
upBracket will determine which parts to use.

Conventional Mounting with Screws

Use the front part of the Hang-up Bracket only. Locate a suitable
mounting position in the vehicle and mark and drill two 3mm holes. Fix
the Hang-up Bracket into place with screws.
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the Hang-up Bracket using the
supplied binding screws. Locate a suitable mounting position.
Apply high quality Double-Sided tape onto the flat area of the Hang-up
Bracket back piece and then press firmly to the mounting position.
13
UNIDEN UH076SX-NB Handheld UHF-CB Transceiver