Safety Information - HP AdvanceStack 100Base-T Hub-8TXE Installation And Reference Manual

Hp advancestack 100base-t hub-8txe - installation and reference guide
Table of Contents

Advertisement

HP Hub-8TXE Installation and Reference Guide

Safety Information

Documentation reference symbol. If the product is marked with this symbol, refer to the
product documentation to get more information about the product.
WARNING
A WARNING in the manual denotes a hazard that can cause injury or death.
CAUTION
A CAUTION in the manual denotes a hazard that can damage equipment.
Do not proceed beyond a WARNING or CAUTION notice until you have understood the
hazardous conditions and have taken appropriate steps.
Grounding
These are safety class I products and have protective earthing terminals. There must be
an uninterruptible safety earth ground from the main power source to the product's input
wiring terminals, power cord, or supplied power cord set. Whenever it is likely that the
protection has been impaired, disconnect the power cord until the ground has been
restored.
For LAN cable grounding:
If your LAN covers an area served by more than one power distribution
system, be sure their safety grounds are securely interconnected.
LAN cables may occasionally be subject to hazardous transient voltages (such
as lightning or disturbances in the electrical utilities power grid). Handle
exposed metal components of the network with caution.
Servicing
There are no user-serviceable parts inside these products. Any servicing, adjustment,
maintenance, or repair must be performed only by service-trained personnel.
These products do not have a power switch; they are powered on when the power cord is
plugged in.
D-2
Safety and Regulatory Statements

Advertisement

Table of Contents
loading

Table of Contents