Table of Contents
Advertisement
HP Hub-8TXE Installation and Reference Guide
LAN Adapters
Make sure the network interface hardware and software drivers for the attached
devices are function properly and are 100Base-TX. Check the LAN adapters
and associated drivers used in any attached workstation or server.
Physical Configuration
If problems occur after altering the network configuration, restore the original
connections, then try to track the problem down by implementing the new
changes, one step at a time. Ensure that cable distances and other physical
aspects of the installation do not exceed 100Base-TX specifications.
Hub Integrity
As a last resort verify the hub's integrity with a power-on reset. Turn the
power to the hub off and then on a few times. If the problem still persists and
you have completed all the preceding diagnoses, contact your HP-authorized
dealer or reseller for further assistance. (Refer to Appendix E.)
Troubleshooting
A-3
Advertisement
Table of Contents
Need help?
Do you have a question about the AdvanceStack 100Base-T Hub-8TXE and is the answer not in the manual?
Questions and answers