Roland V-4EX Owner's Manual page 43

SETUP Menu
HDCP [OFF], ON
[AUTO], 480/576i,
480/576p, 720p, 1080i,
1080p, 640x480, 800x600,
OUTPUT RESOLUTION 1024x768, 1280x768,
1280x1024, 1366x768,
1400x1050, 1600x1200.,
1920x1200
OUTPUT H.POSITION -200 - [0] - 500
OUTPUT V.POSITION -200 - [0] - 500
OUTPUT H.SIZE [100.0%] - 150.0%
OUTPUT V.SIZE [100.0%] - 150.0%
OUTPUT CONTRAST 0 - [64] - 127
OUTPUT BRIGHTNESS 0 - [64] - 127
OUTPUT COLOR 0 - [64] - 127
OUTPUT COLOR SPACE [AUTO], RGB, YCC
OUTPUT DVI-D/HDMI [AUTO], DVI-D, HDMI
OUTFADE WHITE LEVEL 0 - [255]
OUTFADE BLACK LEVEL [0] - 255
NAM/FAM CROSS
0 - [50] - 100
POINT
FADER MODE [NORMAL], QUICK
[CURVE-A],
FADER CURVE
CURVE-B, CURVE-C
FADER CALIBRATE A This performs calibration of the video fader at the A-Bus end.
FADER CALIBRATE B This performs calibration of the video fader at the B-Bus end.
LCD PREVIEW ASPECT [16:9], 4:3
LCD BRIGHTNESS LOW, [HIGH]
MENU DISPLAY LEVEL 5 - [13] - 15
BCKGND LEV - OVERLAY 1 - [12]
NO SIGNAL BACK [BLACK], BLUE
COLOR BAR OUTPUT [OFF], ON
AUTO OFF OFF, [ON]
USB STREAMING [OUTPUT], MONITOR
NTSC/PAL NTSC, PAL
FACTORY RESET This returns the unit to its factory defaults.
* The valid setting range of OUTPUT H.POSITION and OUTPUT V.POSITION differs depending of the output resolution. In the invalid range,
changing of the value does not alter the image position.
This turns HDCP on/off.
This specifies the output resolution.
This adjusts the output position in the horizontal direction.
This adjusts the output position in the vertical direction.
This adjusts the output size in the horizontal direction.
This adjusts the output size in the vertical direction.
This adjusts the output contrast.
This adjusts the output brightness.
This adjusts the output color.
This sets the output color space.
This sets the output mode of the HDMI connector.
This sets the white level during output fade.
This sets the black level during output fade.
This sets the point during NAM/FAM transition (p. 45).
This selects the operation mode of the video fader.
This selects the operating curve of the video fader.
This selects the aspect ratio of monitor display.
This sets the brightness of the monitor.
This adjusts the appearance level of menu display.
This adjusts the brightness of the background (four-way split screen) in overlay display.
This selects the background color at times of no input.
This selects whether a color bar is output.
This makes the setting for AUTO OFF. When [ON] is selected, power is turned off
automatically (p. 10).
This selects the output from the USB port.
This switches between NTSC and PAL.
Menu Operations and Menu List
43