Connecting External Equipment; Signal Flow - Roland V-4EX Owner's Manual

Connecting External Equipment

Connect external equipment as shown in this chapter. For information on specific connection methods, refer to the following pages.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
fig.peripheral-connection.eps
For information on signal formats that can be input and output, refer to "About Input/Output Formats" (p. 23).

Signal Flow

The internal signal flow of the V-4EX is as shown below.
fig.signal-flow.eps
1 2
3 4
PVW OUT
Video HDMI Video HDMI Video
1 2
Frame Sync (480p/576p)
Input Selector
A-BUS B-BUS
Video Mixer / PinP / Key / E ect
Output Fade / Freeze
Scaler
Composite RGB/Component
OUT OUT
RGB/
Component
HDMI
S-Video
HDMI Video
Scaler
3 4
HDMI OUT
USB OUT
Audio In
Delay
Audio Mixer
Delay
15