How To Load Documents - Panasonic Panafax UF-550 User Manual

Loading,,oDOCuments
II iiiiii1_/ i III
How to Load Documents
1. Be sure the document(s) is free of staples, paper clipsand is not tom, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 50 PAGES (see Note 1) on the ADF at one time. ff you have more than 50 pages, wait until transmission
or storing in memory starts as pages feed through, place any remaining pages on top of the last page in
the feeder.
3. Adjust the Document Guides to center the document on the ADF.
Document Guides
CORRECT INCORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to the
following message. You can now change basic transmission settings, or begin the dialling procedure.
ENTER STATION(S) 00%1
THEN PRESS START
[]Note: t. The ADF capacity of UP-550 is up to 30 pages.
2, Transmitting documents longer than 356 mm requires user's assistance.
3. When transmitting documents longer than A4 size, please extend the sub-tray as shown below.
40