Chapter 3: The SmartPath AP (LWN602HA) Overview
3. The SmartPath AP (LWN602HA) Overview
The SmartPath AP is a high-performance and highly reliable 802.11n wireless access point. The SmartPath AP provides dual
concurrent 802.11b/g/n and 802.11a/n radios for 3x3 MIMO (Multiple In, Multiple Out) and dual 10/100/1000 Ethernet ports for
link aggregation or link redundancy. Its power management system uses a concept called smart Power over Ethernet (PoE) to
adjust its power consumption automatically in response to the available power in different environments. Smart PoE supports the
IEEE 802.3af and 802.3at standards.
3.1 Hardware Description
The SmartPath AP is a multichannel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE 802.11a/n
(5 GHz) standards and supports a variety of wireless fidelity (Wi-Fi) security protocols, including Wi-Fi Protected Access (WPA) and
WPA2.
You can see the hardware components on the SmartPath AP in Figures 3-1 and 3-2. Each component is described in Table 3-1.
2.4 GHz (A)
Page 36
Device
Lock Slot
5 GHz (C)
802.11b/g/n RP-SMA Connectors for Detachable Single-Band Antennas
Figure 3-1. SmartPath AP front panel.
802.11a/n RP-SMA Connectors for Detachable Single-Band Antennas
ETH0
ETH1
48V DC
(.625A)
10-/100-/
1000-Mbps
Connector
PoE Ports
Figure 3-2. SmartPath AP back panel.
724-746-5500 | blackbox.com
5 GHz (B)
2.4 GHz (B)
CONSOLE
RESET
Power
Console
Reset
Port
Button
Status LEDs
5 GHz (A)
2.4 GHz (C)