Chapter 9: Common Configuration Examples
9.1.1 Setting Up Topology Maps
In this example, you upload maps to SmartPath EMS VMA showing floor plans for three office buildings and organize them in a
hierarchical structure. You need to make .png of .jpg files of drawings or blueprints showing the layout of each floor. Also, as an
easy means of organizing the maps in the SmartPath EMS VMA GUI, you create a file showing the three buildings HQ-B1, HQ-B2,
and Branch-1. By using this drawing at the top topographical level, you can display icons for each floor of each building. You can
then click an icon to link to its corresponding map. This is shown in Figure 9-2.
NOTE: Instead of using an illustration of buildings, you can also set the image of the root map as None and use the Add Wall tool
to draw three simple rectangles. This option is useful when you have floor plans but not an illustration depicting the
external buildings.
Page 106
x 8
4 SmartPath APs
Floors
per Floor
64
SmartPath APs
Total
Corporate
Headquarters
HQ-B1
SmartPath EMS
(in "HQ-B1")
Figure 9-1. Deployment overview.
724-746-5500 | blackbox.com
x 8
Floors
VPN Tunnel
HQ-B2
2 SmartPath APs
x 4
per Floor
Floors
8 SmartPath APs
Total
Branch
Office
Branch1