Table of Contents
Advertisement
9.5.2 Create a VLAN Object with Three Definitions
Click Configuration > Advanced Configuration > Network Objects > VLANs > New, enter the following, and then click Apply:
VLAN Name: branchVLAN-10-20-30
VLAN ID: 10
Type: Global
Description: VLAN at Branch Office #1
Click New, enter the following, and then click Apply:
VLAN ID: 20
Type: Classifier
Value: branch2
Description: VLAN at Branch Office #2
Click New, enter the following, and then click Apply:
VLAN ID: 30
Type: Classifier
Value: branch3
Description: VLAN at Branch Office #3
To save your settings and close the dialog box, click Save.
9.5.3 Reference the VLAN Object
To assign the VLAN object to a user profile that is used in an SSID that is part of the WLAN policy assigned to the SmartPath APs
at all the branch offices:
Click Configuration > User Profiles > user_profile_name, choose branchVLAN-10-20-30 from the Default VLAN drop-down list,
and then click Save.
The relationships among the objects from the SmartPath APs down to each VLAN definition are as follows:
SmartPath AP > WLAN policy > SSID > user profile > VLAN object > VLAN definition
— VLAN 10; Type: global
branch2 VLAN 20; Type: classifier = branch2
branch3 VLAN 30; Type: classifier = branch3
9.5.4 Update SmartPath APs
To apply the VLAN definitions to the SmartPath APs at all the branch offices, click Monitor > Access Points > SmartPath APs,
multiselect the SmartPath APs at all branch offices, click Update > Upload and Activate Configuration, and then enter the
following:
Upload and activate configuration: (select)
Upload and activate CWP pages and Server key: (clear)
Upload and activate certificate for RADIUS and VPN services: (clear)
Upload and activate employee, guests, and contractor credentials: (clear)
List of all SmartPath APs selected on the Monitor > Access Points > SmartPath APs page: (select)
Chapter 9: Common Configuration Examples
724-746-5500 | blackbox.com
Page 149
Advertisement
Chapters
Table of Contents
