Installing An Optical Drive - HP Compaq 6000 Reference Manual

Installing an Optical Drive

1. If you are replacing an existing optical drive, follow the instructions to remove the drive (see
Removing an Existing Optical Drive on page
that did not previously have a drive in it, follow steps 1 through 7 in
Drive on page 23
2.
Install the security bracket on the rear of the drive.
Figure 2-16
3. Slide the drive all the way into the drive bay.
Figure 2-17
26 Chapter 2 Hardware Upgrades
then proceed to install the drive.
Installing the Optical Drive Security Bracket
Installing the Optical Drive
23). If you are installing an optical drive in a bay
Removing an Existing Optical
ENWW