Installing A Security Lock; Attaching The Computer To A Mounting Fixture - HP Compaq 6000 Reference Manual

15.
Replace the center access panel (see
16. Lock any security devices that were disengaged when the center access panel was removed.
17. Reconnect the power cord and turn on the computer.

Installing a Security Lock

A security lock (sold separately) enables you to secure your computer from theft and unwanted
changes. A security lock is a key lock device that has a wire cable attached. You attach one end of the
cable to your desk (or other stationary object) and the other to this security slot on the computer. Secure
the security lock with the key.
Figure 2-27

Attaching the Computer to a Mounting Fixture

Yo can remove the computer from the stand and install it on a wall, monitor arm, or other mounting
fixture.
CAUTION:
third-party mounting solution to the computer, four 4 mm, 0.7 pitch, and 10 mm long screws are
required. Longer screws must not be used because they may damage the computer. It is important to
verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to
support the weight of the computer.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
ENWW
Installing a Security Lock
This computer supports the VESA industry standard 100 mm mounting holes. To attach a
Replacing the Center Access Panel on page 13).
Installing a Security Lock
33