Chain Dialing; Voice Message Notification - Uniden DECT 3115 Owner's Manual

Chain dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Make your call normally.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code.
3. Press MENU/SELECT to send the code. If you change your mind, just close
the phonebook.

Voice Message notification

If you subscribe to a voice mail service, your phone can notify you when
you have a new message. You can also enter your access number and
retrieve your messages with one key touch. Contact your voice mail
provider for more information.
Entering your voice mail access number
With the phone in standby, open the menu and select Global Setup.
Select Edit Voice Mail, then enter the access number (up to 20 digits) from
your voice mail service. If you need the phone to wait between parts of the
access number, press REDIAL/PAUSE to insert a two-second pause. (You can
insert as many pauses as you want, but each pause counts as a digit.)
Press MENU/SELECT when you're finished; the phone overwrites any previously
saved number.
Getting your Messages
When you have new messages.
MESSAGE/MUTE the phone automatically dials the saved number.
Resetting the Message Icon
After you listen to your messages, the message icon turns off. If it doesn't
you can reset it - with the phone in standby, open the menu and select
Global Setup; select VMWI Reset, then select Yes.
18
icon appears in the display. Press