Replacing Light Bulbs; Going On Vacation - Jenn-Air JRSD2490 Use And Care Manual

It isrecommendedthat you disconnect the powercord before replacing light bulbs.
To replace the upper refrigerator light bulb: (1) graspthe light shieldneartheendsand
pulloutuntilthe shieldpullsfree of the retainerlugs;(2) unscrewbulband replacewith
a 40 watt appliancebulb(60 watt appliancebulbfor ModelJRSD2250 and JRSD2460);
and (3) hookthe lightshieldoverthe upperretainerlugsand press in at the bottomuntil
the shield snaps in place.
To replace the lower refrigerator light bulb on some models: (1) removetheTemp
Control Drawer;(2) usingtwo hands, spread the topad bottom of the light shield vertically
away from each other and pull to the front to remove; (3) unscrew the bulb and replace
it with a 40 watt showcase bulb; (4) using two hands, spread the top and bottom of the
light shield and pushit intoplace engaging tabs in slots; and (5) replacethe Temp Control
Drawer.
To replace the freezer light bulb: (1) remove the ice cube dispenser bin and the top
freezer shelf; (2) unhook the tabs on the top of the light shield by pressing in with your
thumb on the center top of the light shield; (3) pivot the shield down; (4) unscrew the bulb
when it is cool and replace it with a standard 40 watt appliance bulb; (5) pivot the shield
up into place, snapping the tabs into the slots: (6) replace the freezer shelf and the ice
cube dispenser bin.
if you will be gone for a month or less, leave the control knob at its usual setting.
During longer absences, (a) remove all food, (b) disconnect from electrical outlet, (c)
clean the refrigerator thoroughly, including defrost pan, (d) leave doors open to prevent
odor formation, and e) turn off water supply to ice maker, if practical.
16