Alcatel-Lucent 7210 SAS E OS Configuration Manual page 73

Interface QoS Commands
access
Syntax access
Context config>card>mda
config>port
Description
This command enables the access context to configure egress and ingress pool policy parameters.
uplink
Syntax uplink
Context config>port>access
Description
This command enables the network context to configure egress pool policy parameters.
egress
Syntax egress
Context config>port>access
config>port>access>uplink
Description
This command enables the context to specify the slope policy that is configured in the
config>qos>slope-policy context.
pool
Syntax [no] pool [name]
Context config>port>access>egress
config>port>access>uplink>egress
Description
This command configures pool policies.
Default
default
Parameters name — Specifies the pool name, a string up to 32 characters long composed of printable, 7-bit
7210 SAS E Interface Configuration Guide
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
Interface Configuration
Page 73