Uniden Dect 1635 Series Owner's Manual page 25

Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the
system is turned off, it answers after 15 rings & sounds a series of
beeps.)
2. During the greeting or beeps, press
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt. It beeps to let you know
it's waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
For example: to Play message, press # and then 2.
#1 Repeat message
#2 Play message
#3 Skip message
#4 Delete message
#
If you don't press any keys for 15 seconds, the phone will hang up and
return to standby.
"#"
and immediately enter your
#5 Stop playback
#6 Turn the system on
#9 Turn the system off
#0 Hear help prompts
25