Uniden Dect 1635 Series Owner's Manual page 24

Screening Your Calls
You can use the answering system for call screening. While the system
takes a message, you can listen on the base speaker (if you turn on Call
Screen) or from a handset. Only one handset can screen calls at a time.
If another handset tries to screen calls, it beeps and returns to standby.
To...
hear the caller leaving a
message
answer the call
mute the call screen
without answering (if you
mute the call screen, the
system continues taking
the message: it just stops
playing through the speaker)
Using the System While You're Away from home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
The default security code is 80.
1. With the phone in standby, open the menu from any handset.
2. Select Ans. Setup, then select Security Code.
3. Use the number keypad to enter a two-digit security code (00 to 99).
Press MENU/SELECT when you're finished.
#
Remember to make a note of your new security code!
24
From the base
Listen to the
caller over the
speaker.
NA
Press PLAY/
STOP.
From the handset
Press MESSAGE/
MUTE
Press TALK/FLASH
Press END or return
the handset to the
cradle.