Station Loop Length For Cix100/200/670 - Toshiba DP5008 Product Bulletin

Station Loop Length for CIX100, CIX200, CIX670.
In a single site installation, the telephones must be placed within the allowed maximum distance of the
Base Cabinet and optional Expansion Cabinets as shown in the table below. Two-pair wiring is required to
achieve maximum range. BDKS and BWDKU cards do not provide the power wire pair. When these cards
are the station interface, the maximum loop length is shown in the one pair column.
Note When the system is powered by a backup battery, range may be less as the back up battery is
discharged.
Station Loop Lengths
DP5008, DP5018-S
DP5022-SDM, DP5022-SD, DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DDM5060
1
BWDKU and BDKS do not support two pair wiring, one-pair wiring must be used.
Toshiba DP5000-Series Digital Telephones
CIX100, CIX200 and CIX670 Station Wiring Loop Length
Model
with DOCA1A for OCA
with 1ADM
(LM5110, KM5020)
with 2ADM
(LM5110, KM5020)
with 1ADM
(LM5110, KM5020)+DOCA1A
with 2ADM
(LM5110, KM5020) + DOCA1A
Station Wiring, Loop Length, Telephone Power Factors
Maximum line length
(24 AWG)
1
1 Pair
1000 ft.
(303m)
1000 ft.
(303m)
675 ft. (204m)
500 ft. (151m)
675 ft. (204m)
500 ft. (151m)
1000 ft.
(303m)
2 Pair
1000 ft.
(303m)
1000 ft.
(303m)
1000 ft.
(303m)
1000 ft.
(303m)
1000 ft.
(303m)
1000 ft.
(303m)
N/A
11 of 20