Station Loop Length For Cix40 Only; Dp5000-Series Telephone And Adm Power Factors - Toshiba DP5008 Product Bulletin

Station Wiring, Loop Length, Telephone Power Factors

Station Loop Length for CIX40 only

Telephones must be placed within the allowed maximum distance of the CIX40 as shown in the table
below. To achieve maximum line length with one-pair 22 AWG or larger wiring is required. CIX40 systems
do not support Speaker OCA (DOCA1A) on any telephones.
Note
When the system is powered by a backup battery, range may be less as the back up battery is
discharged.
Station Loop Lengths for CIX40 Only
DP5008,
DP5018-S,
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DP5018-S
DP5022-SDM, DP5022-SD,
DP5122-SD, DP5032-SD,
DP5132-SD, DP5130-SDL
DDM5060

DP5000-Series Telephone and ADM Power Factors

The table below shows the -24 VDC power factor for the devices listed.
DP5008
DP5018-S, DP5022-SDM, DP5022-SD, DP5122-SD,
DP5032-SD, DP5132-SD, DP5130-SDL
DOCA1A
LM5110
KM5020
DDM5060
12 of 20
Model
with 1ADM
(LM5110, KM5020)
with 2ADM
(LM5110, KM5020)
Telephone Model Number
Maximum line length (24 AWG)
1 Pair
1000 ft. (303m)
675 ft. (204m)
1000 ft. (303m) if 22 AWG or larger wiring
500 ft. (151m)
1000 ft. (303m) if 22 AWG or larger wiring
1000 ft. (303m)
Power Factor
1.0
0.1
0.4
0.8
Toshiba DP5000-Series Digital Telephones