•
Optional Speaker OCA for all models except the single line telephone
•
Two non-display models for budget-constrained installations
Features and Capabilities
The DP5008 telephone can support on-hook dialing and has a built-in headset interface. All of the other
DP5000-series telephones:
•
Support on-hook dialing
•
Speaker Off-hook Call announce (OCA)
•
Half-duplex speakerphone capability
•
Built-in headset interface
•
Carbon handset support
Notes
1. Setting of headset is by software setting in terminal.
2. Carbon type handset Setting is by software setting in terminal. This is an improvement of the DKT3000
that required cutting a jumper inside the telephone to use a carbon type handset.
The table below shows the telephone models that support add-on modules and external speaker.
Models
DP5008
DP5018-S, DP5022-SDM,
DP5022-SD, DP5122-SD,
DP5032-SD, DP5132-SD,
DP5130-SDL
Toshiba DP5000-Series Digital Telephones
Key expansion
No
Up to two ADMs
(LM5110, KM5020)
External Speaker
Connection of External Speaker Control Box:
BESCB1A (External Speaker Control Box) can be
connected.
(The interface connector is accessed through the base
of the telephone.)
Value Propositions
5 of 20
Need help?
Do you have a question about the DP5008 and is the answer not in the manual?
Questions and answers
How do you set up a rollover
How to reprogram the greeting on a Toshiba dp 5022 sdm