Appendix D: Using A Desktop Computer To Connect To The Network - Bose SoundTouch Stereo JC series II Owner's Manual

Apendices
Appendix D: Using a desktop computer to
connect to the network
If you have a desktop computer, temporarily move the Acoustimass
SoundTouch wireless adapter near the computer to set up the W-Fi
™
connection.
The diagram below shows how to temporarily set up your Acoustimass
and SoundTouch
™
Once you have the components in place, follow the procedures in this guide to
connect to your network. See "Adding the system to your Wi-Fi network" on page
11. After making the network connection, you can test the system to make sure
everything works.
When you are done, disconnect the Acoustimass
AC (mains) power and permanently install the stereo system. When you reconnect
the Acoustimass
®
See "Placing the speakers" on page 14.
Bose link
®
cable
Acoustimass
®
ule
mod
Note: Connect the USB cable to the SoundTouch
when the app instructs you to do so.
34 - English
wireless adapter near your desktop computer.
module to power, it reconnects to your Wi-Fi
AC power
cord
USB cable
module from your computer and
®
network.
®
wireless adapter only
™
module and
®
network
®
module
®