Appendix B: Wall Mounting The Soundtouch™ Wireless Adapter - Bose SoundTouch Stereo JC series II Owner's Manual

Apendices
Appendix B: Wall mounting the
SoundTouch™ wireless adapter
You can mount the adapter on a wall (hardware not included). See "Mounting
hardware specifications" for the correct hardware.
Mounting hardware specifications
Item
Wall thickness
Drill bit
Pan-head wood screws (2)
Plastic wall anchors (2)
If the mounting hardware instructions differ from these instructions, follow the
mounting hardware instructions.
There are two ways to mount the adapter:
• Vertically; connector panel facing left
• Horizontally; connector panel facing up
1.
Drill two holes 6¼ in. (159 mm) center-to-center.
2. Insert plastic wall anchors (if mounting to wallboard).
3. Install pan-head wood screws.
Note: Leave the screw heads ¼ in. (6.35 mm) above wall surface.
4. Position adapter onto the screws.
32 - English
Wood
1 in. (25.4 mm) or thicker
⅛ in. (3.17 mm)
#8x1¼ in. (32 mm)
Not used
6¼ in. (159 mm)
center-to-center
Wallboard
⅜
in. (9.5 mm) or thicker
³/ in. (4.76 mm)
16
#8x1¼ in. (32 mm)
#6-8x1 in. (25.4 mm)