Outdoor Sensor; Terminal Block - Sanyo SHP-TH90GDN-SW Technical Manual

Outdoor sensor

Terminal block

Cable intake for main
voltage supply and
radiator circulation
pump
Electric box behind the
plastic front cover
The sensor must be placed in the most suitable place on the wall of the house
facing north-west or north to avoid exposure to the morning sun.
Protect the sensor from the sun if there is a risk the sensor will be affected by it.
The sensor must be placed on about 2/3 height of the wall. Be sure not to
place the sensor over the ventilation ducts, doors, windows or where it
can be exposed to other things than the important outdoor temperature.
The terminal block for electric connection is shown below.
Top view of the tank unit
Electric box
Electronic PCB
Electronic PCB
Cable fixings
Main power
supply
connectors
Lower electrical
immersion
heater
Cable intake
Cable fixing
Cable intake for
sensors