Main Standard Settings; How To Operate The Control System: Main Screen; To Step Inside A Menu - Sanyo SHP-TH90GDN-SW Technical Manual

Main standard settings

How to operate the control system: Main screen

To step inside a menu:

The boilers control system is provided with standard settings. At start-up the main
functions of the product operates as follow:
, without heat pump unit (works like an electric boiler).
- 12 kW electrical power
- Operation without room sensor
- Operation without room temperature decrease during nights
- Values for a mid temperature radiator system
- Langua edish
All settings can be changed within the control system. For more specific information of
standard settings, see table
The display normally shows the main screen. The most important values are shown in
the main screen. Room temperature can directly be changed in the main screen by
pressi
Menus
The control system is subdivided in menus for a logical and easy use. To display the
menus choice,
O ws the actual values, options and temperatures in the
system.
T
options.
T
here.
AL: a menu for the service man. Functions can here be manually
operated.
T
To access a menu:
After each menu a flashing mark [] is shown.
hen the mark is filled (dark), just pr
inside the wanted menu.
pressi O
Valid values:
A value is valid after pressing
Step back:
d for 10 minutes the main screen automatically will be displayed.
You can also step back by pressing
pressing it several times.
xplan
y pressing the OK button.
O button once. The sub menus are:
erm values, e.g. total operating time and last alarms.
l settings are made, e.g. temperatures, times and
de to get access to this menu. Limits are set
me (day, hour, minute) can be changed in this menu.
wanted menu by pressing
until the mark flashes behind the wanted row. Activate the row by
e the value by pressing
n. You will end up in the main menu by
w you are
with the