Plumbing System - Sanyo SHP-TH90GDN-SW Technical Manual

General information
Important! Be
Domestic cold water
inlet (Ø22 mm out)
The installation must be carried out in accordance with local regulations.
The boiler must be connected to an expansion vessel in an open or closed
system.
Carry out installation adjustments in accordance with the descriptions in
Chapter 10 rt-up
dling and maintenance, show him the knobs, the
handles etc to make sure he clearly understands how the equipment works
and must be maintained.
The radiator system must be rinsed be
arting up the heat pump sy
be sure to wa
Pipe connections
Primary flow out Primary flow return
connection (Ø22 mm in) connection (Ø22 mm
out)
starting up the equipment.
ecting the product.
to avoid the load circulation to run dry.
Domestic hot water
outlet (Ø22 mm out)
Waste water pipe
connection (Ø22 mm in)
Expansion pipe
connection (DN 20 in)
Lifting device (DN 20
in). Not a water
connection.
From heat
pump.
Connection
(Ø22 mm out)
To heat pump.
Connection
(Ø22 mm out)