Accessing Your Messages; Message Indicators - Uniden FP1355 Owner's Manual

acceSSIng your meSSageS

1. Call your telephone number.
2. Enter your 3-digit security code. You can enter this code any time during the
greeting or after the beep.
3. The unit waits for a remote command for 20 seconds after the correct
security code has been entered. Menu selections can be made while the
menu is playing.
NOTE 1: The unit answers on the 10th ring when it is turned off or the
memory is full. If memory is full, play messages and erase some of
them to restore memory.
NOTE 2: After the unit plays the remote menu, it waits 20 seconds for
a command and then disconnects.

meSSage InDIcatorS

The following display messages indicate message or unit status:
00 caLLs
UnKnown
nUMBeR
UnKnown
naMe
BLocKeD
nUMBeR
incoMPLete
Data
staRt/enD
Message
Call record log count.
The incoming call does not have Caller ID service or
their service area is not linked to yours. If UnKnown
naMe appears along with a calling number, the name
information for that number was not available.
The name information for that number was not available.
The caller is registered as "Private Number" and the Caller
ID information is withheld.
Caller information has been interrupted during
transmission.
Indicates you are at the beginning or the end of the call
record log.
A message has been recorded as a memo.
17