Irqs Activity Monitoring - MSI MS-9105 User Manual

peripheral or component is detected.
Note: To use the function of Wake Up On LAN/Ring, you need to install
a modem/LAN card supporting power on function.
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the
system on a scheduled time/date.
Date (of Month)
Use the field to specify the date for RTC Alarm Resume. Settings: 0~31.
Resume Time (hh:mm:ss)
Use the field to specify the time for RTC Alarm Resume. Format is
<hour><minute><second>.

IRQs Activity Monitoring

Press <Enter> to enter the sub-menu and the following screen appears:
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
Primary INTR
IRQ3~IRQ15
IRQs Activity Monitoring
ON
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
Selecting ON will cause the system to wake
up from power saving modes if activity is
detected from any enabled IRQ channels.
Enables or disables the monitoring of the
specified IRQ line. If set to Enabled, the
3-27
®
AWARD BIOS Setup
Item Help
Menu Level 888