CHAPTER 3
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card or Modem
which supports power on functions. During Disabled, the system cannot be
boot up through LAN and ignores any incoming call from the modem.
During Enabled, the system can be boot up through LAN and modem.
RTC Alarm Resume
This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
IRQs Activity Monitoring
Primary INTR
IRQ3
(COM 2)
IRQ4
(COM 1)
IRQ5
(LPT 2)
IRQ6
(Floppy Disk)
IRQ7
(LPT 1)
IRQ8
(RTC Alarm)
IRQ9
(IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
You can choose which month the
system will boot up. Set to 0, to boot
every day.
You can choose what hour, minute and
second the system will boot up.
On
Primary
Primary
Primary
Primary
Menu Level
Primary
Disabled
Secondary
Secondary
Secondary
Primary
Primary
Primary
Disabled
3-25
AWARD
BIOS SETUP
®
Item Help
>