Nomenclature; Names Of Parts And Their Functions - Omron SYSDRIVE 3G3MV Setup Manual

Preparing for Operation and Monitoring
2-1

Nomenclature

2-1-1 Names of Parts and their Functions

Data display
Simplified-LED
indicators
Operation keys
Appearance
2-2
Name
Data display
FREQ adjuster
FREF indicator
FOUT indicator
IOUT indicator
MNTR indicator
F/R indicator
LO/RE indicator
PRGM indicator
Displays relevant data items, such as frequency reference,
output frequency, and parameter set values.
Sets the frequency reference within a range between 0 Hz
and the maximum frequency.
The frequency reference can be monitored or set while this
indicator is lit.
The output frequency of the Inverter can be monitored
while this indicator is lit.
The output current of the Inverter can be monitored while
this indicator is lit.
The values set in U-01 through U-18 are monitored while
this indicator is lit.
The direction of rotation can be selected while this
indicator is lit, when operating the Inverter with the RUN
Key.
The operation of the Inverter through the Digital Operator
or according to the parameters set is selectable while this
indicator is lit.
Note This status of this indicator can be only monitored
while the Inverter is in operation. Any RUN command
input is ignored while this indicator is lit.
The parameters in n001 through n179 can be set or
monitored while this indicator is lit.
Note While the Inverter is in operation, the parameters can
be only monitored and only some parameters can be
changed. The RUN command input is ignored while
this indicator is lit.
Chapter 2
FREQUENCY
adjuster
Function