Removing The Heat Sink Screws; Figure; Removing The Heat Sink; Fan & Cpu - Toshiba Satellite M100 Maintenance Manual

4 Replacement Procedures
4.23 Fan & CPU
Removing the Fan & CPU
To remove the Fan, Heat Sink, and CPU, you must first remove the display assembly, keyboard,
top cover and system board, and then follow the steps below:
1. Turn the system board upside down. Remove the four M2.0x4 screws from the heat sink.
2. Lift and remove the heat sink from the system board.
4-62

Figure 4-70

Removing the heat sink screws

Figure 4-71

Removing the heat sink

[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual